Grand Vitara 2WD L4-2.4L (2009)
Drive Belt: Testing and Inspection
Accessory Drive Belt Tension Inspection
Accessory Drive Belt Tension Inspection
J24B
1. Disconnect negative (-) cable from battery.
2. Inspect accessory drive belt for cracks, cuts, deformation, wear and cleanliness.
If any abnormality is found, replace accessory drive belt.
3. Check that tension indicator (1) is on the right of indicator (2) when it is viewed from vehicle front.
If indicator (1) is on the left of Indicator (2), replace accessory drive belt.
