Repair Steering Column Lock for Grand Vitara 2WD L4-24L (2009)
Steering Column Lock: Service and Repair
Steering Lock Assembly (Ignition Switch) Removal and Installation
Removal
1) Remove steering column assembly.
2) Using center punch (with sharp point) (1) as shown in the figure, loosen and remove steering lock mounting bolts (2).
NOTE:
Use care not to damage aluminum part of steering lock body (3) with center punch (1).
3) Turn ignition key to ACC or ON position and remove steering lock assembly (3) from steering column assembly (4).
Installation
1) Position oblong hole of steering shaft (2) in the center of hole in steering column assembly (1).