Grand Vitara 2WD V6-2.5L (2004)
Brake Drum: Service and Repair
Rear Brake Drum Removal and Installation
Tightening torque
Bleeder plug (a): 7.5 Nm (0.75 kgf-m, 5.5 ft. lbs.)
Removal
1. Hoist vehicle and pull up parking brake lever.
2. Remove wheel.
3. Release parking brake lever.
4. Remove parking brake lever cover screws and with rear part of brake lever cover (1) lifted a little, loosen parking brake cable locking nut (2).
5. Remove brake drum (1) by using 8 mm bolts (2) (2 pcs.).
Installation
Before installation, inspect the parts.
