Grand Vitara 2WD V6-2.5L (2004)
9. Install idler sprocket No.2 by aligning match marks (2) on LH silver plate (1) of 1st timing chain.
10. Install crankshaft sprocket by aligning match marks (2) on gold or yellow plate (1) of 1st timing chain and crankshaft timing sprocket. To install it,
fit a spanner to hexagonal part at the center of RH bank intake camshaft to turn a little.
CAUTION: Do not turn camshaft more than necessary. If turned excessively, valve and piston may get damaged.
11. Apply oil to bearing of idler sprocket No.1.
12. Install idler sprocket No. 1.
13. With latch of tensioner adjuster No.1. returned and plunger (1) pushed back into body, insert stopper (3) into latch (2) and body. After inserting it,
check to make sure that plunger (1) will not come out.
14. Install timing chain tensioner adjuster No. 1 (1).
