Grand Vitara 2WD V6-2.5L (2004)
^
Always install new bolts with pre-coated adhesive to the locations with * mark,
^
Tighten manifold nuts to specified torque.
3. Attach exhaust manifold stiffener to transmission.
4. Install exhaust No.1 pipe (1) and stiffener (3). Tighten exhaust No.1 pipe bolts and nuts to specified torque.
5. Reverse removal procedure to install front propeller shaft, if removed. When installing propeller shaft, align match mark (1). Use the following
specification to torque universal joint flange.
6. Connect EGR pipe to left (No. 1) bank exhaust manifold (1).
7. Install exhaust manifold covers (2).
8. Install oil level gauge guide (3) using new O-ring.
