Grand Vitara 2WD V6-2.5L (2004)
Throttle Position Sensor: Service and Repair
Removal
1. Disconnect battery negative cable at battery.
2. Disconnect connector from TP sensor.
3. Remove TP sensor from throttle body.
Installation
1. To install sensor, place it onto throttle body so that sensor pickup lever (2) can engage with throttle body lever (1). "A" should engage with "B".
2. Hand-tighten TP sensor screws.
3. Connect connector to TP sensor securely.
4. Connect battery negative cable to battery.
5. Adjust installation angle of TP sensor according to procedure described in "Throttle Position (TP) Sensor Adjustment".
