Grand Vitara 2WD V6-2.5L (2004)
2. Connect yellow connector (1) of contact coil and combination switch assembly by pushing connector till click is heard from it.
3. Connect yellow connector (1) of passenger air bag (inflator) module by pushing connector till click is heard from it.
4. Install glove box.
5. Install "AIR BAG" fuse to fuse box.
6. Turn ignition switch to ON position and verify that "AIR BAG" warning lamp flashes 6 times and then turn OFF.
7. If it does not operate as described, perform Air Bag Diagnostic System Check.
