Grand Vitara 2WD V6-2.5L (2004)
9. Break with a chisel (1) the thin ground sensor rotor, and it can be removed (if equipped with ABS).
10. In order to remove the retainer ring (1) from the shaft (3), grind with a grinder two parts (2) of the bearing retainer ring (1) as illustrated till it
becomes thin.
CAUTION: Be careful not to grind too far not to damage the shaft (3).
11. Break with a chisel (1) the thin ground retainer ring, and it can be removed.
12. Remove wheel bearing (2) from axle shaft (1) by using hydraulic press (3).
13. Remove bearing retainer.