Grand Vitara 2WD V6-2.5L (2004)
Liftgate Window Glass: Service and Repair
Rear-End Door Glass Removal And Installation
Refer to Head lining Removal and Installation, Windshield Removal and Installation procedures and cautions are basically the same. However, note the
following.
-
Before applying primer to glass (2) edge, install molding (1) according to installing position shown in the figure.
-
Observe the following precautions when applying adhesive (4) along glass edge.
-
Adhesive should be applied evenly especially in height.
-
Be careful not to damage primer.
-
Press glass (2) against body quickly after adhesive is applied.
Adhesive amount specification (rear-end door glass)
Height "b": 15 mm (0.59 in.)
Width "c": 8 mm (0.31 in.)
Width "d": 16 mm (0.63 in.)
Clearance "e": 1 mm (0.04 in.)
