Grand Vitara 2WD V6-3.2L (2010)
Cabin Ventilation Duct: Service and Repair
Center Ventilation Louver Removal and Installation
Center Ventilation Louver Removal and Installation
Removal
1. Disconnect negative (-) cable at battery.
2. Disable air bag system referring to Disabling Air Bag System:Advanced Air Bag or Disabling Air Bag System:Except Advanced Air Bag.
3. Remove center garnish with audio unit and HVAC control module.
4. Remove mounting screw (1) and then pull off center ventilation louver (2).
5. Disconnect connectors and remove center ventilation louver.
6. Remove center ventilation louver from center garnish.
Installation
Reverse removal procedure, noting the following item.
-
Insert backside of center ventilation louver to ventilator duct surely.
-
Be sure to align boss (1) and claws (2) of center ventilation louver with installation hole of instrument panel.
-
Enable air bag system referring to Enabling Air Bag System:Advanced Air Bag or Enabling Air Bag System:Except Advanced Air Bag.