Grand Vitara 2WD V6-3.2L (2010)
Installation
1) Install hydraulic unit / control module assembly by reversing removal procedure.
Tightening torque
Brake pipe flare nut for M10: 16 Nm (1.6 kg-m, 12.0 lbf-ft)
Brake pipe flare nut for M12: 19 Nm (1.9 kg-m, 14.0 lbf-ft)
ABS (ESP) hydraulic unit / control module assembly bolt: 9 Nm (0.9 kg-m, 7.0 lbf-ft)
ABS (ESP) hydraulic unit / control module assembly bracket bolt: 25 Nm (2.5 kg-m, 18.5 lbf-ft)
ABS (ESP) hydraulic unit / control module assembly bracket nut: 25 Nm (2.5 kg-m, 18.5 lbf-ft)
2) Connect ABS (ESP) control module connector and lock it as shown in figure.
