Grand Vitara 2WD V6-3.2L (2010)
Use wheel nuts (1) and suitable plain washers (2) to hold the disc securely against the hub, then mount a dial gauge as shown in figure and measure the
runout at 20 mm (0.79 in.) from the outer edge of the disc.
NOTE: Check rear wheel bearing (wheel hub) for looseness before measurement.
Rear brake disc deflection
Limit: 0.1 mm (0.004 in.) max
Special Tool
(A): 09900-20607 (Dial gauge)
(B): 09900-20701 (Magnetic stand)