Grand Vitara 2WD V6-3.2L (2010)
Installation
1. Loosen belt tension by turning tensioner (1) clockwise.
CAUTION:
N32A: Do not turn tensioner pulley with a torque higher than 80 N.m (8.2 kgf-m, 59.0 lbf-ft).
J24B: Do not turn tensioner pulley with a torque higher than 59 N.m (6.0 kgf-m, 43.5 lbf-ft).
2. While keeping tensioner in the loose position install accessory drive belt (2).