Grand Vitara 2WD V6-3.2L (2010)
Timing Chain: Service and Repair
2ND Timing Chain (Bank 1) and Timing Chain Tensioner Adjuster No.1 Components
2nd Timing Chain (Bank 1) and Timing Chain Tensioner Adjuster No.1 Components
NOTE: For identification of each cylinder and bank, refer to Precaution for Identification of Cylinder and Bank:N32A.
2ND Timing Chain (Bank 1) and Timing Chain Tensioner Adjuster No.1 Removal and Installation
2nd Timing Chain (Bank 1) and Timing Chain Tensioner Adjuster No.1 Removal and Installation
Reference: 2nd Timing Chain (Bank 1) and Timing Chain Tensioner Adjuster No.1 Components:N32A
NOTE: For identification of each cylinder and bank, refer to Precaution for Identification of Cylinder and Bank:N32A.
Removal
1) Remove timing chain cover.
2) By turning crankshaft, align camshaft (bank 1) and crankshaft at specific position as follows.
a) Using special tool, align circle mark (1) on crankshaft timing sprocket with circle mark (2) on oil pump.
Special Tool