suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Procedures|Page 1186 > < Procedures|Page 1184
Page 4
background image

A/T fluid specification
SUZUKI ATF 3317 or Mobil ATF 3309

NOTE:
^

DO NOT RACE ENGINE while checking fluid level, even after engine is started.

^

DO NOT OVERFILL. Overfilling can causes foaming and loss of fluid through breather. Then slippage and transmission failure can result.

^

If vehicle was driven under high load such as pulling a trailer, fluid level should be checked about half an hour after it is stopped.

^

When checking oil level, oil level gauge must be used in proper direction. Insert oil level gauge so that its front or back face is directed to the
front of vehicle. When oil level indicated on front face of oil level gauge differs from that on back face, use lower one.

Procedures|Page 1186 > < Procedures|Page 1184