Grand Vitara 2WD V6-3.2L (2010)
Tire Pressure Sensor: Testing and Inspection
Tire Pressure Sensor On-Vehicle Inspection
Tire Pressure Sensor On-Vehicle Inspection
NOTE: Perform Steps 6) to 7) within 15 minutes after the vehicle was driven. If more than 15 minutes have elapsed after the vehicle was driven,
perform Step 5) again.
1. Turn ignition switch to OFF position.
2. Connect SUZUKI scan tool to DLC (1).
Special Tool
(A): SUZUKI scan tool (SUZUKI-SDT)
3. Check each tire for crack, any other damage and air leakage.
4. Adjust each tire pressure to 230 kPa.
