Grand Vitara 2WD V6-3.2L (2010)
Main Relay (Computer/Fuel System): Testing and Inspection
Engine and Emission Control System Relay Inspection
Main Relay (Single Type Relay)
1. Disconnect negative cable from battery.
2. Remove main relay (1) from fuse box (2).
3. Check that there is no continuity between terminal "C" and "D". If there is continuity, replace relay.
4. Connect battery positive (+) terminal to terminal "B" of relay. Connect battery negative (-) terminal to terminal "A" of relay. Check for continuity
between terminal "C" and "D". If there is no continuity when relay is connected to the battery, replace defective relay.
