Grand Vitara 2WD V6-3.2L (2010)
Accelerator Pedal Position Sensor: Testing and Inspection
Accelerator Pedal Position (APP) Sensor Inspection
Accelerator Pedal Position (APP) Sensor Inspection
1. Remove accelerator pedal assembly (incorporating APP sensor assembly).
2. Check APP sensor output voltage as follows. If faulty condition is found, replace accelerator pedal assembly (incorporating APP sensor assembly).
a. Connect three new 1.5 V batteries (1) in series, and check that total voltage is 4.5 - 5.0 V.
b. Connect voltmeter (2) and batteries to APP sensor as shown in figure.
