Grand Vitara 2WD V6-3.2L (2010)
^
With shift solenoid valve (1) connected to battery (2), confirm that shift solenoid valve is open by blowing air (50 - 200 kPa, 0.5 - 2.0 kgf/cm2, 7 -
28.5 psi) into solenoid valve as shown in figure.
^
With shift solenoid valve (1) not connected to battery (2), confirm that shift solenoid valve is closed by blowing air (50 - 200 kPa, 0.5 - 2.0
kgf/cm2, 7 - 28.5 psi) into solenoid valve as shown in figure.
CAUTION:
Do not insert air gun against strainer installed on inlet of solenoid valve too deeply, when blowing air into solenoid valve. If not, the
strainer will be damaged.
