Grand Vitara 2WD V6-3.2L (2010)
Headlamp Igniter Module: Service and Repair
Ballast Removal and Installation
Ballast Removal and Installation
WARNING: Be sure to read Precautions for Discharge Headlight Service (If Equipped)carefully before working. Neglecting them may result
in personal injury.
Removal
1. Check to ensure that lighting switch is at OFF position.
2. Disconnect negative (-) cable at battery.
3. Remove headlight housing.
4. Remove ballast (1) from headlight housing (2).
5. Disconnect connector (3) from ballast.
