Grand Vitara 2WD V6-3.2L (2010)
8. Place 12 volts vehicle battery (1) near the shorted end of deployment harness (A).
9. Check that area around air bag (inflator) module or seat belt pretensioner is clear of all people and loose or flammable objects.
10. Connect adapter cable (B) as follows.
Special Tool
(B): 09932-76510
-
For driver air bag (inflator) module [A]
Check that driver air bag (inflator) module is placed with its vinyl trim cover facing up, and connect adapter cable (B) to driver air bag
(inflator) module.
-
For passenger air bag (inflator) module [B]
Check that passenger air bag (inflator) module is firmly and properly secured on deployment fixture (special tool), and connect adapter cable
(B) to passenger air bag (inflator) module.
-
For side-air bag (inflator) module [C]
Verify that side-air bag (inflator) module is firmly and properly on deployment fixture (special tool), and connect adapter cable (B) to side-air
bag (inflator) module.
-
For side curtain-air bag (inflator) module [D]
a. Connect adapter cable (B) to side curtain-air bag (inflator) module.
b. Pile 2 tires (2) and wheel-installed tire (3) on top of tire with side curtain-air bag (inflator) (4), and tie them with wire harness (5) as shown.
Wire harness specifications
Stripped wire harness section 1.25 mm2 (0.0019 in.2) or more (Stripped wire harness diameter 1.25 mm (0.05 in.) or more)
NOTE: Wind wire harness (5) around at least 2 times.
-
For seat belt pretensioner [E]
a. Connect adapter cable (B) to seat belt pretensioner.
b. Pile 2 wheel"installed tires (3) on top of tire with seat belt pretensioner (6), and tie them with wire harness (5) as shown.
Wire harness specifications
Stripped wire harness section 1.25 mm2 (0.0019 in.2) or more (Stripped wire harness diameter 1.25 mm (0.05 in.) or more)
NOTE: Wind wire harness (5) around at least 2 times.
c. Drape blanket (7) over those tires.
11. Connect adapter cable (B) to deployment harness (A) connector and lock connectors with lock lever.
