Grand Vitara 2WD V6-3.2L (2010)
b. Clear space (3) on ground about 185 cm (6 ft) in diameter where side-air bag (inflator) module for deployment. Paved, outdoor location
where there is no activity is preferred. If outdoor location is not available, space on shop floor where there is no activity and provide
sufficient ventilation. Ensure no loose or flammable objects are within deployment area.
c. Place deployment fixture (A) on ground.
Special Tool
(A): 09932-75041
d. Fill plastic reservoir in deployment fixture (A) with water or sand. This is necessary to provide sufficient stabilization of fixture during
deployment.
e. Attach side-air bag (inflator) module (1) in deployment fixture using mounting attachment, sleeve lock nut and washer (2).
NOTE: Make sure that deploying direction faces as shown in the figure against mounting attachment.