Grand Vitara 2WD V6-3.2L (2010)
Installation
1) Check that vehicle's front tires are at straight-ahead position and contact coil cable assembly is centered.
CAUTION:
These two conditions are prerequisite for installation of steering wheel. If steering wheel has been installed without these conditions,
contact coil cable assembly will break when steering wheel is turned.
2) Install steering wheel (1) to steering shaft with 2 lugs (2) on contact coil cable assembly fitted in two grooves (3) in the back of steering wheel and
also aligning marks (4) on steering wheel and steering shaft.
3) Tighten steering shaft nut to specified torque.
Tightening torque
Steering shaft nut: 33 Nm (3.3 kg-m, 24.0 lbf-ft)