Grand Vitara 2WD V6-3.2L (2010)
Front Suspension Frame, Stabilizer Bar and/or Bushings Removal and Installation
Front Suspension Frame, Stabilizer Bar and/or Bushings Removal and Installation
Reference: Front Suspension Frame, Stabilizer Bar and/or Bushings Components
Removal
1) Hoist vehicle and remove wheels (right & left).
2) Remove engine under cover.
3) Remove suspension control arm.
4) Remove right side and left side front drive shaft assembly (if equipped).
5) Remove stabilizer joints (1). When loosening joint nut, hold stud with hexagon wrench.