Grand Vitara 2WD V6-3.2L (2010)
Shift Solenoid: Testing and Inspection
4-Speed Automatic Transmission
Solenoid Valves (Shift Solenoid-A, Shift Solenoid-B, TCC Pressure Control Solenoid and Pressure Control Solenoid) Inspection
Solenoid Valves (Shift Solenoid-A and Shift Solenoid-B)
Resistance check
CAUTION:
Be very careful as dust etc. does not enter when solenoid valves are inspected.
Measure resistance between terminal (2) and solenoid valve body. If resistance is out of specification, replace solenoid valve (1).
Shift solenoid-A and Shift solenoid-B resistance
Standard: 11 - 15 ohms (at 20 degrees C (68 degrees F))
Operation check
^
With solenoid connected to battery (2) as shown in figure, check that solenoid valve (1) is actuated with click sound.
