Grand Vitara 4WD L4-2.4L (2009)
16) Dismounting rear differential from rear suspension frame.
Installation
1) Remounting rear differential to rear suspension fame.
2) Support rear suspension frame with rear differential by using mission jack, and jack up it.
WARNING:
When mounting rear suspension frame, be sure to apply some supporting equipment (such as mission jack) under it at well-balanced
position in the center section so as to prevent from its drop.
3) Install rear suspension frame (3) to vehicle body and tighten rear suspension frame mount bolts (1) with washer (2) to specified torque.
CAUTION:
If suspension frame mount bolt is reused, apply engine oil to thread, bearing and trunk surface.
Tightening torque
Rear suspension frame mount bolt (a): 135 Nm (13.5 kg-m, 98.0 lbf-ft)