Grand Vitara 4WD L4-2.4L (2009)
Rear Brake Caliper Disassembly and Assembly
Rear Brake Caliper Disassembly and Assembly
Disassembly
NOTE:
Before disassembly, clean all around caliper with brake fluid.
1) Remove disc brake piston with air blown into flexible hose joint bolt installation hole.
WARNING
Do not apply too highly compressed air which will cause piston to jump out of piston cylinder. Place a cloth (1) to prevent piston from
damage, it should be taken out gradually with moderately compressed air. Do not place your fingers in front of piston when using
compressed air.