Grand Vitara 4WD L4-2.4L (2009)
Rear
Rear Wheel Speed Sensor Removal and Installation
Removal
1) Disconnect negative cable from battery.
2) Disconnect rear wheel speed sensor coupler (1).
3) Hoist vehicle and remove wheel.
4) Remove harness clamp (4) and clamp bolts (2).
5) Remove rear wheel speed sensor (3) from knuckle.
CAUTION:
^
Do not pull wire harness when removing rear wheel speed sensor.
^
Do not cause damage to surface of rear wheel speed sensor and do not allow dust, etc. to enter its installation hole.
