Grand Vitara 4WD L4-2.4L (2009)
Clutch Switch: Service and Repair
CPP Switch (for Cruise Control) Removal and Installation
Removal
1. Disconnect connector of CPP switch (for cruise control) (1) with ignition switch OFF.
2. Remove CPP switch (for cruise control) (1) from pedal bracket.
Installation
1. Install CPP switch (for cruise control) (1) to pedal bracket.
2. With clutch pedal (4) released, adjust switch position so that clearance between end (3) of thread and clutch pedal bracket is within specification.
Clearance between end of thread and clutch pedal bracket
"a" : 2.0 - 3.0 mm (0.079 - 0.11 in.)
3. Tighten lock nut (2) to specified torque.
Tightening torque
CPP switch lock nut (a): 7.5 N.m (0.75 kg-m, 5.5 lbf-ft)