Grand Vitara 4WD L4-2.4L (2009)
6) Tighten camshaft housing bolts according to the following procedure.
a) Apply engine oil to bolt thread and seat of camshaft housing bolts.
b) Install camshaft housing No.1 (1). Install camshaft housing bolts, and tighten them by hand.
c) Tighten camshaft housing bolts in numerical order ("1" - "21") evenly and gradually.
Tightening torque
Camshaft housing bolt*: 11 Nm (1.1 kg-m, 8.5 lbf-ft)
7) Install dowel pin to exhaust camshaft.
CAUTION:
Be careful not to drop dowel pin into the space between timing chain cover and cylinder block.
8) Install exhaust camshaft timing sprocket (3) to exhaust camshaft according to the following procedure.
a) Align timing chain link (1), which is painted in "removal" under this section, with timing mark (2) on exhaust camshaft timing sprocket (3),
and loop timing chain up over exhaust camshaft timing sprocket.
b) Install exhaust camshaft timing sprocket (3) with timing chain to the exhaust camshaft.