Grand Vitara 4WD L4-2.4L (2009)
Engine Oil Pressure: Testing and Inspection
Oil Pressure Check
NOTE:
Prior to checking oil pressure, check the following.
^
Oil level in oil pan
If oil level is too low, add oil up to full level mark on oil level gauge.
^
Oil quality
If oil is discolored or deteriorated, change it.
^
Oil leaks
If leak is found, repair it.
1) For 5 M/T model, place gear shift lever in "Neutral" and apply parking brake.
For 4 A/T model, place select lever in "P" and apply parking brake.
2) Disconnect OCV connector.
3) Remove engine cover.
4) Disconnect oil pressure switch connector (1).
5) Remove oil pressure switch (2) from cylinder block.
6) Install special tools to threaded hole where oil pressure switch was removed.
Special Tool
(A): 09915-77311
