Grand Vitara 4WD L4-2.4L (2009)
Headlamp Alignment Sensor: Service and Repair
Height Sensor Removal And Installation (If Equipped)
Removal
CAUTION:
-
Do not disassemble bracket (4) and link (3) from height sensor (2). Disassemble will spoil its original function. If faulty condition is found,
replace it with new one in a set.
-
If height sensor was dropped from a height of 30 cm (0.9 ft) or more, replace it with new one.
1. Disconnect negative (-) cable at battery.
2. Disconnect height sensor connector (1) from height sensor (2).
3. Remove height sensor bracket bolts (7) and nuts (8).
4. Remove height sensor (1) with its bracket (4) from suspension frame (6) and lower arm (5).
