Grand Vitara 4WD L4-2.4L (2009)
Engine Control Module: Removal and Replacement
Engine Control Module (ECM) Removal and Installation
ECM (Engine Control Module Removal and Installation
CAUTION: As ECM consists of precision parts, be careful not to expose it to excessive shock.
NOTE: After replacing ECM, perform following procedure.
-
Registration VIN data to ECM.
-
Registration of ignition key.
-
Electric throttle control system calibration.
Removal
1. Disconnect negative cable from battery.
2. Disconnect connectors from ECM as follows.
a. Push lock (1) to release locking of lock lever (2).
b. Turn lock lever in arrow direction until it stops.
3. Remove ECM (1) and cover from bracket by removing their mounting bolts (2).
