Grand Vitara 4WD L4-2.4L (2009)
Camshaft Position Sensor: Service and Repair
CMP (Camshaft Position) Sensor Removal and Installation
Removal
1. Disconnect negative cable from battery.
2. Disconnect connector from CMP sensor.
3. Remove CMP sensor from cylinder head.
Installation
1. Reverse removal procedure noting the following.
-
Apply engine oil to O-ring of CMP sensor (1).
-
Tighten CMP sensor bolt to specified torque.
Tightening torque
CMP sensor bolt (a): 11 N.m (1.1 Kg-m, 8.5 lbf-ft)