Grand Vitara 4WD L4-2.4L (2009)
Installation
1. Check that none of the following faulty conditions exists.
-
Bend, scratch, deformity in vehicle body where SDM is mounted.
-
Foreign matter or rust on mating surface of vehicle body where SDM is mounted.
2. Install SDM (2) to vehicle.
CAUTION: Ensure that arrow on the SDM is pointing toward the front of the vehicle.
3. Tighten SDM bolts (1) to specified torque.
Tightening torque
SDM bolt (a): 6 N.m (0.6 Kg-m, 4.5 lbf-ft)