Grand Vitara 4WD L4-2.4L (2009)
21. Reconnect the OCS female connector to the vehicle harness connector under the seat cushion.
22. Using a green marking pen (included in the OCM Reflash Kit), and put a green dot on the OCS female connector in an area to make it easily visible.
This will indicate that the OCM reprogramming has been performed.
23. Connect the Suzuki SDT scan tool to the vehicle, check and clear any DTC(s). After clearing DTC(s), confirm there are no codes stored as current
or history.
24. If no codes are present, power off the Suzuki SDT, turn the ignition switch off, and disconnect the Suzuki SDT from the DLC. The process is
complete.
COM Port Troubleshooting instructions
1. To check the installation and confirm the Com Port configuration, right click "My Computer", then click "Properties"