Grand Vitara 4WD L4-2.4L (2009)
-
For passenger air bag (inflator) module [B]: Remove glove box from instrument panel and disconnect passenger air bag (inflator) module
connector (2).
-
For side-air bag (inflator) module [C] Disconnect side-air bag (inflator) module connectors (3) under front seat cushion.
-
For side curtain-air bag (inflator) module [D]
Remove rear pillar trim and disconnect side curtain-air bag (inflator) module connectors (4).
-
For seat belt pretensioners (right and left) [E] Remove both side (driver and passenger's side) center pillar lower trim and disconnect seat belt
pretensioner connectors (5).
4. Confirm that each air bag (inflator) module and/or seat belt pretensioners is securely mounted.
5. Check that there is no open, short or damage in special tools (deployment harness (A), adapter cable (B), (C) and (D)). If any faulty condition is
found, do not use it and be sure to use new special tool. And connect adapter cable (B), (C) or (D) to deployment harness (A) and lock connectors
with lock slider.
Special Tool
(A): 09932-75031
(B): 09932-78332
(C): 09932-77310