Grand Vitara 4WD L4-2.4L (2009)
b. Tie side curtain-air bag inflator (1) to tire (3) with wire harness (2) as shown.
Wire harness specifications
Stripped wire harness section 1.25 mm2 (0.0019 in.2) or more (Stripped wire harness diameter 1.25 mm (0.05 in.) or more)
CAUTION: Make sure that wire harness is tight. It is very dangerous if looseness in wire harness results in side curtain-air bag
inflator flying off due to shock from inflator deploying.
NOTE: Wind wire harness (2) around at least 3 times.
c. Clear space (5) on ground about 185 cm (6 ft) in diameter where side curtain-air bag (inflator) module (1) is set for deployment. Paved,
outdoor location where there is no activity is preferred. If outdoor location is not available, use space on shop floor where there is no
activity and sufficient ventilation is provided. Ensure no loose or flammable object exists within activation area.
d. Pile tire with side curtain-air bag (inflator) module on tire (4).
