Grand Vitara 4WD L4-2.4L (2009)
7. Stretch deployment harness (A) from air bag (inflator) module or seat belt pretensioner to its full length 10 m (33 ft).
Special Tool
(A): 0993 -75031
8. Place 12 volts vehicle battery (1) near the shorted end of deployment harness (A).
9. Check that area around air bag (inflator) module or seat belt pretensioner is clear of all people and loose or flammable objects.
10. Connect adapter cable (B) as follows.
Special Tool
(B): 09932-76510
-
For driver air bag (inflator) module [A] Check that driver air bag (inflator) module is placed with its vinyl trim cover facing up, and connect
adapter cable (B) to driver air bag (inflator) module.
-
For passenger air bag (inflator) module [B] Check that passenger air bag (inflator) module is firmly and properly secured on deployment
fixture (special tool), and connect adapter cable (B) to passenger air bag (inflator) module.
-
For side-air bag (inflator) module [C] Verify that side-air bag (inflator) module is firmly and properly on deployment fixture (special tool), and
connect adapter cable (B) to side-air bag (inflator) module.
-
For side curtain-air bag (inflator) module [D]
a. Connect adapter cable (B) to side curtain-air bag (inflator) module.
b. Pile 2 tires (2) and wheel-installed tire (3) on top of tire with side curtain-air bag (inflator) (4), and tie them with wire harness (5) as shown.
Wire harness specifications
