Grand Vitara 4WD L4-2.4L (2009)
4. Connect negative (-) cable at battery.
5. Enable air bag system referring to Enabling Air Bag System:Except Advanced Air Bag.
Side-Sensor Removal and Installation
Side-Sensor Removal and Installation
WARNING: Be very careful of the following when handling a sensor.
-
Never strike or jar a sensor.
-
A sensor bolt must be carefully torqued to assure proper operation. Under loose connection, it could cause improper operation of the air
bag system.
Removal
1. Disconnect negative (-) cable at battery.
2. Disable air bag system. Refer to Disabling Air Bag System:Except Advanced Air Bag.
3. Remove center pillar lower trim and side sill scuff.
4. Disconnect side-sensor connector sliding connector outer (1) as shown.