Grand Vitara 4WD L4-2.4L (2009)
-
Foreign matter or rust on mating surface of vehicle body where SDM is mounted.
2. Install SDM (2) to vehicle.
CAUTION: Ensure that arrow on the SDM is pointing toward the front of the vehicle.
3. Tighten SDM bolts (1) to specified torque.
Tightening torque
SDM bolt (a): 6 N.m (0.6 Kg-m, 4.5 lbf-ft)
4. Connect SDM connector (1) to SDM (2) securely.
5. Install console rear panel.
6. Enable air bag system referring to Enabling Air Bag System: Advanced Air Bag.
7. Connect negative (-) cable at battery.