Grand Vitara 4WD L4-2.4L (2009)
13. Notify all people in immediate area that you intend to deploy air bag (inflator) module or activate seat belt pretensioners.
NOTE:
-
When air bag (inflator) module deploys or seat belt pretensioners activate, rapid gas expansion will create substantial report. Wear suitable ear
protection. Notify all people in immediate area that you intend to deploy air bag (inflator) module or to activate seat belt pretensioner and
suitable ear protection should be worn.
-
After air bag (inflator) module has been deployed, surface of air bag may contain powdery residue. This powder consists primarily of
cornstarch (used to lubricate air bag (inflator) module as it inflates) and by-products of chemical reaction.
WARNING:
-
Do not place deployed air bag (inflator) module and activated seat belt pretensioners near any flammable objects.
-
Do not apply water, oil, etc. to deployed air bag (inflator) module and activated seat belt pretensioners.
-
Wait for about 30 minutes before touching any metal surface of air bag (inflator) module or seat belt pretensioner modules.
Disregarding these precautions may cause fire or personal injury.
-
Do not disassemble activated seat belt pretensioner, because activated gas remains in tube.
Failure to follow procedures may result in fire or personal injury.
14. Separate two banana plugs (1) on deployment harness (2).
15. Connect deployment harness (2) to 12 volts vehicle battery (3). This will immediately deploy or activate air bag (inflator) module or seat belt
pretensioners.
16. Disconnect deployment harness (2) from 12 volts vehicle battery (3) and short two deployment harness leads together by fully seating one banana
plug into the other.
