Grand Vitara 4WD L4-2.4L (2009)
3. Take tire pressure sensor from tire.
For wheel without tire pressure sensor:
Dismount tire using tire changing machine. Follow equipment manufacturer's instructions.
4) Mount tire and tire pressure sensor (if equipped) to wheel as follows.
For wheel with tire pressure sensor:
1. Check tire pressure sensor for function using special tool.
When tire pressure sensor is activated, flashing LED and beeping sound of special tool indicate an activation of the tire pressure sensor. In
case that LED does not flash and beeping sound is not heard even if special tool is normal, replace tire pressure sensor.
Special Tool
(A): 09945-86510
2. Replace seal (1) of tire pressure sensor with a new one.
3. Install tire pressure sensor (2) to wheel and then tighten tire pressure sensor mounting nut (3) to specified torque.
Tightening torque
Tire pressure sensor mounting nut (a): 9 Nm (0.9 kg-m, 6.5 lbf-ft)
