Grand Vitara 4WD L4-2.4L (2009)
Quarter Window Glass: Service and Repair
Rear Quarter Window Removal And Installation
Removal
1. Clean both inside and outside of glass and around it.
2. Using tape, cover body surface around glass to prevent any damage.
3. If necessary, remove instrument panel. Refer to Instrument Panel Removal and Installation.
4. If necessary, remove quarter under trim, center pillar inner upper trim, rear pillar trim and head lining. Refer to Head Lining Removal and
Installation.
5. Drill hole with eyeleteer (1) through adhesive and let piano string through it.
6. Cut adhesive all around rear quarter window (1) with piano string (2). When using tool, windshield knife (3), to cut adhesive, be careful not to
cause damage to windshield. Use wire to cut adhesive along lower part of windshield.
NOTE: Use piano string (2) as close to glass as possible so as to prevent damage to body.