Grand Vitara 4WD L4-2.4L (2009)
12. When reusing windshield, remove the adhesive (1) from it, using care not to damage primer coated surface (2).
Installation
1. Using cleaning solvent, clean windshield edge where windshield glass is to be adhered. (Let it dry for more than 10 minutes.)
2. To determine installing position of glass (1) to body (2), position glass against body so that clearance between upper end of glass (1) and body (2)
is approximately 5.5 mm (0.217 in.) and clearances between each side end (right & left) of glass (1) and body (2) are even. Then mark mating
marks on glass (1) and body (2) as shown. Upper clearance can be adjusted by moving glass stoppers position.
