Grand Vitara 4WD V6-2.5L (2003)
5. Disconnect door lock motor lead wire.
6. Remove lock assembly.
Installation
To install front door lock, reverse removal procedure, noting the following.
-
Door latch striker.
Move door latch striker (2) up or down so its center aligns with the center of groove "A" on the door, as shown.
NOTE: Striker should be moved vertically and placed level. Do not adjust door lock.
Tightening torque
Door latch striker screw (a): 13 N.m (1.3 kg-m, 9.5 lbf-ft)