Grand Vitara 4WD V6-2.5L (2003)
12. Install wheel and tighten wheel nuts to specified torque.
Tightening torque
Wheel nut (b): 100 Nm (10.0 kgf-m, 72.5 ft. lbs.)
13. Upon completion of all jobs, depress brake pedal with about 30 kg (66 lbs.) load three to ten times so as to obtain proper drum-to shoe clearance.
Adjust parking brake cable.
14. Tighten parking brake lever cover screws.
15. Check to ensure that brake drum is free from dragging and proper braking is obtained. Then remove vehicle from hoist and perform brake test
(foot brake and parking brake).
16. Check each installed part for oil leakage.
