suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Electronic Brake Control Module|Type 1|Page 2922 > < Electronic Brake Control Module|Type 1|Page 2920
Page 2
background image

1) Check that basic brake system other than ABS is in good condition.

2) Check that battery voltage is 11 Volts or higher.
3) With "ABS" warning lamp. check that no abnormality is detected in ABS. Refer to DTC Check: Type 2.
4) Lift up vehicle.
5) Set transmission to neutral and release parking brake.
6) Turn each wheel gradually by hand to check if brake dragging occurs. If it does, correct.

Electronic Brake Control Module|Type 1|Page 2922 > < Electronic Brake Control Module|Type 1|Page 2920