suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Drive Belt|Adjustments > < A/C Compressor Drive Belt Inspection|Page 947
Page 2
background image

Power Steering Pump and / or A/C Compressor Drive Belts (If Equipped) for G16 / H25 Engines

1. Disconnect negative cable at battery.
2. Inspect belt for cracks, cuts, deformation, wear and cleanliness. If any defect exists, replace.
3. Check belt for tension.

If belt tension is out of the following specifications, adjust it referring to "Power Steering Belt Check and Adjustment: ".

Power steering pump and / or A/C compressor drive belt tension under 100 N, 10 kg or 22 lb pressure 
"a": 6 - 9 mm (0.24 - 0.35 in.) deflection
"b": 4 - 7 mm (0.16 - 0.28 in) deflection

4. Connect negative cable to battery.

Drive Belt|Adjustments > < A/C Compressor Drive Belt Inspection|Page 947