Grand Vitara 4WD V6-2.5L (2003)
4. Install RH bank 1st timing chain intake camshaft sprocket (1) noting the following points.
^
The sprocket should be set in such way that its RH mark (4) can be seen.
^
Camshaft (2) should be held stationary by using a spanner at its hexagonal parts (3) as shown in figure.
5. Install timing chain tensioner (1) as shown in figure.
6. Install 1st timing chain by aligning match marks (2) on RH silver plate (1) of 1st timing chain and RH bank 1st timing chain intake camshaft
sprocket.
7. Apply oil to bush of idler sprocket No.2.
8. Install idler sprocket No.2 and sprocket shaft.